overview levelone ies-1820 industry ethernet switch provides 16 poe ports 10/100base plus 2 port gigabit combo sfp to enable high speed network at mission-critical environment. with the 1u height rack-mountable size, this switch can be easily installed in the cabinet, plus the clearly visible status leds provide simple monitoring of port link activity. moreover, the sfp slots support pluggable modules that enabling you to choose from a variety of transceivers. high reliability all components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including electric & utility, critical infrastructure, transportation and surveillance security. this device operates under -40 to 75 celsius (-40 to 167 fahrenheit) temperature. features - provides 16 10/100base-tx poe ports and 2 gigabit/sfp ports - 4096 mac addresses - 2.25m bits bu er memory - poe ports can support the ieee 802.3at standard and power up 30w devices - -40c to 75c (-40f to 167f) operating temperature range - 1000 mbps-full-duplex, 10/100mbps-full/half-duplex, auto-negotiation, auto-mdi/mdix - alarms for power failure by relay output - supports rack mounting installation - complies with nema ts2 environmental requirements for tra c control equipment - complies with iec61000-6-2 emc generic standard immunity for industrial environment - ul508 safety this device has been tested under ul508 standard for industrial control equipment to endurance under test turn on and o 6,000 times while loaded, with no single failure; also with nema (national manufacturers association) ts2 environmental certi ed for the tra c control equipment that withstand extreme temperatures, operating voltage and humidity uctuation, vibration and shock commonly experienced in severe outdoor environments. plug & play this unmanaged industrial ethernet switch is designed for the demanding industrial environments at businesses in need of instant connectivity with no setup or con gure required, truly plug and play. redundancy this redundant power system is designed to meet the challenge of power failure to ensure reliability and constant availability. single power design works ne in non-critical network applications, but it falls short drastically for network applications in transportation, automate production or banking. power over ethernet this switch is power sourcing equipment (pse), and it is fully complied with ieee 802.3at poe standard at maximum 30w power budget per port. it helps to save infrastructure wiring costs dramatically by eliminating electric wiring and less ups needed. also, it is compatible with ieee802.3af standard pd devices. diagrams unit: mm side top back front ies-1820 16 x 802.3at + 2ge sfp combo unmanaged switch -40 to 75c 205 442 4 4
order information ies-1820 - 16 x 802.3at + 2ge sfp combo unmanaged switch -40 to 75c optional accessories sfp-4200 - 1.25g mmf sfp transceiver (550m, 850nm, -20 to 85c) sfp-4210 - 1.25g smf sfp transceiver (10km, 1310nm, -40 to 85c) sfp-4240 - 1.25g smf sfp transceiver (40km, 1310nm, -40 to 85c) sfp-4270 - 1.25g smf sfp transceiver (70km, 1550nm, -40 to 85c) sfp-4310 - 1.25g bidi smf sfp transceiver (10km, 1310nm, -40 to 85c) sfp-4320 - 1.25g bidi smf sfp transceiver (10km, 1550nm, -40 to 85c) sfp-4330 - 1.25g bidi smf sfp transceiver (20km, 1310nm, -40 to 85c) sfp-4340 - 1.25g bidi smf sfp transceiver (20km, 1550nm, -40 to 85c) SFP-4350 - 1.25g bidi smf sfp transceiver (40km, 1310nm, -40 to 85c) sfp-4360 - 1.25g bidi smf sfp transceiver (40km, 1550nm, -40 to 85c) sfp-4370 - 1.25g bidi smf sfp transceiver (60km, 1310nm, -40 to 85c) sfp-4380 - 1.25g bidi smf sfp transceiver (60km, 1550nm, -40 to 85c) package contents ies-1820 quick installation guide www.level1.com one world_one brand_one level_ technology standards ieee802.3 10base-t, ieee802.3u 100base-tx/fx/sfp, ieee802.3x, ieee802.3ab 1000base-t, ieee802.3af, ieee 802.3at, ieee802.2z 1000base-sx/lx forward and filtering rate 14,880pps for 10mbps 148,810pps for 100mbps 1,488,100pps for 1000mbps packet buffer memory 2.25m bits processing type store-and-forward address table size 4096 mac addresses environment operating temperature -40c to 75c (-40f to 167f) storage temperature -40c to 85c (-40f to 185f) ambient relative humidity 5% to 95% (non-condensing) regulatory approvals iso manufactured in an iso9001 facility safety ul508 (pending) emi fcc part 15, class a en61000-6-4 - en55022 - en61000-3-2 - en61000-3-3 ems en61000-6-2 - en61000-4-2 (esd standards) contact: + / - 6kv; criteria b air: + / - 8kv; criteria b - en61000-4-3 (radiated fri standards) 10v/m, 80 to 2.7g; 80% am criteria a - en61000-4-4 (burst standards) signal ports: + / - 4kv; criteria b d.c. power ports: + / - 4kv; criteria b - en61000-4-5 (surge standards) signal ports: + / - 1kv; line-to-line; criteria b d.c. power ports: + / - 0.5kv; line-to-earth; criteria b - en61000-4-6 (induced rfi standards) signal ports: 10v @ 0.15 - 80mhz; criteria a d.c. power ports: 10v @ 0.15 - 80mhz; criteria a earth ground ports: 10v @ 0.15 - 80mhz; criteria a - en61000-4-8 (magnetic field standards) 30a/m @ 50, 60hz; criteria a environmental test compliance iec60068-2-6 fc (vibration resistance) 5g @ 150hz; criterion 3 (operation/storage/transport) iec60068-2-27 ea (shock) 25g @ 11ms (half-sine shock pulse; operation) 50g @ 11ms (half-sine shock pulse; storage/transport) iec60068-2-32 ed (free fall) 1m (3.281ft.) mechanical casing metal case dimensions single power: 442mm (w) x 205mm (d) x 44.2mm (h) (17.40" (w) x 8.07" (d) x 1.73" (h)) weight 3kg (6.61lbs.) installation rack mounting interface ethernet port 10/100 base: 16 ports gigabit: 2 prots led indicators per unit: power status: power 1, 2 (green), fault per port: 10/100tx, 100fx: link/activity (green), speed (amber) per port: gigabit: link/activity (green) , speed (amber) per poe: 10/100tx (amber) power power input 47 - 57vdc power consumption device: max. 15w (without poe) poe power budget (depends on power input):480w max. poe power output ieee 802.3at: up to 30w/port, 50 - 57vdc, 600ma max. supports reverse polarity protection mtbf 30.8 years half-duplex back-pressure and ieee802.3x full-duplex flow control nema ts1/2 environmental requirements for traffic control equipment
|
